2014 - 2018: TS, Xây dựng, Đại học Quốc gia Chonnam, Hàn Quốc,
2012 - 2014: ThS, Xây dựng, Đại học Quốc gia Chonnam, Hàn Quốc, ngày cấp bằng 08/2014
2005 - 2010: KS, Xây dựng CNT& Mỏ, Đại học Mỏ địa chất Hà nội, Việt nam, ngày cấp bằng 06/2010
2010 - Hiện tại: Cán Bộ Giảng Dạy, Đại học Mỏ địa chất Hà nội, Từ Liêm, Hà nội
2009 - 2010: , Công ty Neo Samwoo (Hàn Quốc),
Project manager, Cao học
Road and railway engineering, Đại học
Dam-Energy disispation, Đại học
Cơ học đá, Đại học
Xây dựng công trình ngầm và mỏ Mô phỏng phương pháp số Môi trường Mỏ Địa kỹ thuật và địa nhiệt Động đất trong công trình ngầm
1. Study on pore water pressure development in railway embankment due to cyclic loads, Main researcher Đang thực hiện
2. Linear / nonlinear SSI analysis comparison and verification by time domain nonlinear SSI analysis, Researcher Đang thực hiện
3. Energy-saving housing and geothermal system appropriate technology development, Main researcher Đang thực hiện
4. Evaluation methods of hydraulic resistance capacity of soil supporting offshore structures such as wind generator and long-span bridge, Researcher Đang thực hiện
5. Evaluation of load transfer of earth anchor by using in-tendon FBG sensor, Main researcher Đang thực hiện
1. Tan Manh Do, Hyeong-Ki Kim, Min-Jun Kim, Young-sang Kim, Utilization of controlled low strength material (CLSM) as a novel grout for geothermal systems: Laboratory and field experiments, Journal of building engineering, 2020
2. Young-sang Kim, Ba Huu Dinh, Tan Manh Do, Gyeongo Kang, Development of thermally enhanced controlled low-strength material incorporating different types of steel-making slag for ground-source heat pump system, Renewable Energy, 2020
3. Tan Manh Do, Anh Ngoc Do, Gyeongo Kang, Young-sang Kim, Utilization of marine dredged soil in controlled low-strength material used as a thermal grout in geothermal systems, Construction & Building Materials, 2019
4. Nguyen Van Dung, Nguyen Phi Hung, Tan Manh Do*, Experimental study on the efficacy of water infusion for underground mining of a coal seam, Applied Sciences,, 2019
5. Tan Manh Do, Gyeongo Kang, Young-sang Kim, Development of a new cementless binder for controlled low strength material (CLSM) using entirely by-products, Construction & Building Materials, 2019
6. Tan Manh Do, Gyeongo Kang, Gyu-Hyun Go, Young-sang Kim, Evaluation of Coal Ash–Based CLSM Made with Cementless Binder as a Thermal Grout for Borehole Heat Exchangers, ASCE Journal of Materials in Civil Engineering, 2019
7. Young-sang Kim, Thien Quoc Tran, Gyeongo Kang, Tan Manh Do, Stabilization of a residual granitic soil using various new green binders, Construction & Building Materials, 2019
8. Gyeongo Kang, Tan Manh Do, Jae-seong Lim, Young-sang Kim, Evaluation of erosion resistance capacity on compacted weathered granite soil using non-destructive tests, Bulletin of Engineering Geology and the Environment, 2019
9. Thien Quoc Tran, Young-sang Kim, Gyeongo Kang, Ba Huu Dinh, Tan Manh Do, Feasibility of Reusing Marine Dredged Clay Stabilized by a Combination of By-Products in Coastal Road Construction, Transportation Research Record, 2019
10. Tan Manh Do, Gyeongo Kang, Young-sang Kim, Thermal conductivity of controlled low strength material (CLSM) under various degrees of saturation using a modified pressure plate extractor apparatus- A case study for geothermal systems, Applied Thermal Engineering, 2018
11. Young-Sang Kim, My Dang Quoc, Tan Manh Do, Joon Kyu Lee, Soil stabilization by ground bottom ash and red mud, Geomechanics and Engineering, 2018
12. Tan Manh Do, Gyeongo Kang, Ngan Vu, Young-sang Kim, Development of a new cementless binder for marine dredged soil stabilization: Strength behavior, hydraulic resistance capacity, microstructural analysis, and environmental impact, Construction & Building Materials, 2018
13. Young-sang Kim, Tan Manh Do, Min-Jun Kim, Bong-Ju Kim, Hyeong-ki Kim, Utilization of by-product in controlled low-strength material for geothermal systems: Engineering performances, environmental impact, and cost analysis, Journal of Cleaner Production, 2017
14. Hyun-Jong Sung, Tan-Manh Do, Jae-Min Kim and Young-Sang Kim, Effective temperature compensation of FBG sensors embedded tendon for long-term monitoring of ground anchor tensile forces, Smart structure and systems, 2017
15. Tan Manh Do, Young-Sang Kim, My Quoc Dang, Influence of curing conditions on engineering properties of excavatable controlled low strength material made with cementless binder, KSCE Journal of Civil Engineering, 2017
16. Tan Manh Do, Young-Sang Kim, Prediction of the load transfer depth of a ground anchor using smart tendon, Geomechanics and Engineering, 2016
17. Young-sang Kim, Tan Manh Do, Hyeong-ki Kim, Gyeongo Kang, Utilization of excavated soil in a coal ash based controlled low strength material (CLSM), Construction & Building Materials, 2016
1. Tan Manh Do, Young-sang Kim, Gyeongo Kang, Thien Quoc Tran, Thermal Conductivity of Controlled Low Strength Material (CLSM) Made Entirely from By-Products, Key Engineering Materials, 2018
2. Thien Quoc Tran, Young-Sang Kim, Tan Manh Do, Kyeong M. Hwang, Preliminary Evaluation of the Earthquake Hazard for Underground Electric Facility Lines in Pohang City based on ArcGIS, MATEC Web Conferences, 2017
3. Young-Sang Kim, My Quoc Dang, Tan Manh Do, Studies on compressive strength of sand stabilized by alkali-activated ground bottom ash and cured at the ambient conditions, International Journal of Geo-Engineering, 2016
4. Tan Manh Do, Young-Sang Kim, Engineering properties of controlled low strength material (CLSM) incorporating red mud, International Journal of Geo-Engineering, 2016
5. Tan Manh Do, Young-Sang Kim, Byung-cheol Yoo, Improvement of engineering properties of pond ash based CLSM with cementless binder and artificial aggregates made of bauxite residue, International Journal of Geo-Engineering, 2015
1. Tan Manh Do, Youngsang Kim, GyeongO, Thien Quoc Tran, Thermal conductivity of controlled low strength material (CLSM), International Symposium on Energy Geotechnics SEG-2018 (Switzerland), , 2018
2. Tan Manh Do, Young-Sang Kim, Jaemin Kim, Eunhaeng Lee, Estimation of Extended Drucker Prager model parameters of Dacite rock based on dynamic shear modulus degration, Korean Geotechnical Society, , 2018
3. Tan Manh Do, Youngsang Kim, My Quoc Dang, Stabilization of marine dredged sediment using lime-fly ash-red mud-gypsum binder, Proceedings of the 19th International Conference on Soil Mechanics and Geotechnical Engineering, Seoul,, , 2017
4. Tan Manh Do, Youngsang Kim, Stabilization of Marine Dredged Sediments (MDS) by Industrial Byproducts in Honam Area, ISOPE-2017, San Francisco, United State, , 2017
5. Tan Manh Do, Youngsang Kim, My Quoc Dang, Thermal conductivity of controlled low strength material (CLSM) made with excavated soil and coal ash, International de Géotechnique - Ouvrages -Structures, Hochiminh, Vietnam, , 2017
6. Tan Manh Do, Young-Sang Kim, Thien Quoc Tran, Ngan, Effect of Lime on Engineering Properties of CLSM Made with Fly Ash-Red Mud-Lime-Gypsum Binder, Korean Society of Civil Engineering, , 2017
7. Thien Quoc Tran, Young-Sang Kim, Tan Manh Do, Evaluation of the earthquake hazard for underground electric facility lines in Busan area by using Arcgis, Korean Society of Civil Engineering, , 2017
8. Tan Manh Do, Young-Sang Kim, My Quoc Dang, Effect of fly ash on engineering properties of CLSM made with fly ash-red mud-lime-gypsum binder, Korean Geotechnical Society, , 2017
9. Tan Manh Do, My Quoc Dang, and Thu Thi Do, 3D numerical simulation of an anchor-slope system considering anchor heads, International Conference on Advances in Mining and Tunnelling-ESASGD 2016, Vietnam, , 2016
10. Tan Manh Do, Youngsang Kim, My Quoc Dang, and Chi-bok Jeong, Development of controlled low-strength materials derived from coal ash and excavated soil without using Portland cement, International Conference on Geotechnics for Sustainable Infrastructure Development-Geotec Hanoi 2016, Vietnam, , 2016
11. My Quoc Dang , Youngsang Kim , Tan Manh Do, and Vu Thi Tuyet ngan, Feasibility of soil stabilization by alkaline-activated ground bottom ash, International Conference on Geotechnics for Sustainable Infrastructure Development-Geotec Hanoi 2016, Vietnam, , 2016
12. T.M. Do., Y.S. Kim., C.H. Lee & M.Q. Dang, Effect of degree of saturation on thermal conductivity of CLSM used for a horizontal ground coupled heat pump system, 1st International Conference on Energy Geotechnics ICEGT 2016, Germany, , 2016
13. Tan Manh Do, Young-Sang Kim, Experimental determination of thermal conductivity of unsaturated Controlled Low-Strength Material (CLSM), The 4th Japan-Korea Joint Workshop on Unsaturated Soils, Okayama, Japan., , 2016
14. Tan Manh Do, My Quoc Dang, Young-Sang Kim, Development of New Cementless Binder for Controlled Low Strength Material (CLSM) utilizing Fly ash, Red mud and Phosphogypsum, Korean Society of Civil Engineering, , 2016
15. Tan Manh Do, Young-Sang Kim, My Quoc Dang, Effects of red mud utilization on engineering properties of ponded ash based Controlled Low-Strength Materials, Korean Geotechnical Society, , 2016
16. Young-Sang Kim, My Quoc Dang, Tan Manh Do, Compressive strength characteristics of sand stabilized by ground bottom ash as a binder, Korean Geotechnical Society, , 2016
17. Tan Manh Do, Young-Sang Kim, Hyoung-ki Kim, Engineering properties of pond ash based Controlled Low-Strength Materials, Korean Society of Civil Engineering, Gwangju division, , 2015
18. Tan Manh Do, Young-Sang Kim, Effect of replacement of excavated soil on engineering properties of controlled low strength material made by industrial by-products, International conference on Geo-energy and Geo-Environment, Hongkong, , 2015
19. Tan Manh Do, Young-Sang Kim, Chang-ho Lee, Evaluation of controlled low strength material made with industrial by-products as a backfill of borehole heat exchangers, International conference on Geo-energy and Geo-Environment, Hongkong, , 2015
20. Tan Manh Do, Hyun-Jong Sung, Jae-Min Kim, Young-Sang Kim, Prediction of the load transfer depth for cost-effective design of a ground anchor using FBG sensors embedded tendon and numerical analysis, The 3rd International Conference CIGOS 2015, Paris, France, , 2015
21. Tan Manh Do, Shinhyun Jung, Utilization of industrial by-products at Gwang-yang area for the production of excavatable controlled low strength materials, The 3rd International Conference CIGOS 2015, Paris, France., , 2015
22. Tan Manh Do, Young-Sang Kim, Comparison of characteristics of Controlled Low Strength Material made with reclaimed clay and pond ash, Korean Society of Civil Engineering, , 2015
23. Tan Manh Do, Young-Sang Kim, Influence of Curing Conditions on Engineering Properties of Controlled Low-Strength Material Made with Cementless Binder, Korean Geo-Environmental Society Conference, , 2015
24. Tan Manh Do, Young-Sang Kim, My Quoc Dang, Mun Son, Byeong-cheol Yoo, Development of excavatable Controlled Low-Strength Materials made with cementless binder and partial replacement of artificial aggregate, Korean Society of Coastal and Ocean Engineers, , 2015
25. Tan Manh Do, Young-Sang Kim, Experimental and numerical studies on the load transfer of ground anchors, The Twenty-Seventh KKHTCNN Symposium on Civil Engineering, Shanghai, Shanghai, China, , 2014
26. Tan Manh Do, Young-Sang Kim, Shinhyun Jung, Experimental study on hydraulic resistance of sea ground around Wind-Turbine considering to the direction of current flow and confining pressure, 14th International conference on Computational & Experimental Engineering and Sciences, , 2014
27. Tan Manh Do, Young-Sang Kim, Jae-seong Lim, Investigation into the feasibility of using by-products from controlled low strength materials considering to the thermal conductivity property”,, Korean Society of Civil Engineering, , 2014
: Bằng khen Thủ khoa tốt nghiệp các trường đại học, học viện 2010